Hinged door cm 70×240

1.059,001.637,00 including VAT and transport

Technical Specifications

  • Pre-assembled aluminium frame, 53 mm door with primer, invisible hinges adjustable in 4 directions, AGB magnetic lock;

 

  • Anodised aluminium sealed frame with silver-satin finish on 3 sides with top stop crossbar, ready to be installed on any type and thickness of wall (minimum 70 mm), complete with spacers to keep the frame unleaded during installation and complete with black sound-absorbing rubber gasket pre-installed on the frame, all delivered pre-assembled at the factory;

 

  • Solid wood door covered with mdf with a total thickness of 53 mm, already primed (white primer) over the entire surface, the door is ready to be painted with the same paint used for the walls or to be covered with wallpaper. Our doors are always 100% edged (we do not use laminate);

 

  • Invisible hinges adjustable in 4 directions. No. 3 for H up to 220 cm with a load capacity of approx. 100 kg, No. 4 for H up to 300 cm with a load capacity of approx. 130 kg. Push doors can be clad with panels (Boiserie) up to 15 mm thick, pull doors can also be clad but on the hinge side the cladding must be with the edge cut at 45° to allow the door to rotate and open;

 

  • AGB Polaris 2XT magnetic lock pre-installed in the thickness of the sash, for patent key or privacy lock depending on the choice made during configuration;

Measures

  • Measurements of the compartment to be made (masonry, plasterboard, concrete) cm 81 × 245,5 H. It is possible to make the walls in these measurements during the construction site and wait for the delivery in peace;

 

  • External-frame dimensions (3-sided frame) cm 80 × 245 H;

 

  • Internal-frame dimensions (with installation on finished floor) cm 70 × 240 H;

 

  • Door dimensions (+/-) cm 70 x 239,5 H. Our doors are already factory-tolerated to be perfectly flush with the floor;

 

  • Real-passage measure with door open (+/-) cm 65/70 x 240 H depending on the type of opening ordered. Our pull-up doors (not panelled/coated) open up to 180°.

Installation

  • Our doors are ideal for closing off bedrooms, kitchens, studies, bathrooms and toilets. They are not suitable for cinema or music rooms. The doors are for covered and heated interiors, so they are not suitable for closing access passages to garages if these are not heated;

 

  • Installation is very easy for bricklayers, drywallers or craftsmen who fit doors and windows. Construction companies are generally able to fit our doors without any problems;

 

  • We only recommend DIY to customers who have experience with plasterboard wall construction;

 

  • The preparation of the compartment (81 x 245,5 H cm can be masonry, plasterboard or gasbeton) will allow you to continue the work and wait for the arrival of the doors and/or the complete frame in peace. All you need to do is respect the measurements ‘of the compartment to be made’ indicated in the description of the measurements;

 

  • Please note: for cinemas, music halls or where more soundproofing is required, please e-mail us screenshots of the doors configured and added to the shopping cart. We will reply as soon as possible with a quote for soundproof doors.

Delivery Times

  • Selected EU-Countries Delivery (by telephone-appointment) included in the price, check the delivery time HERE you will find more information on delivery;

 

  • EU-Business-price Available! Please:
    -Add the product to the basket and go to the checkout.
    -Complete the form please and have a look to the 0%-VAT price after the 30-seconds VIES verification is done.
    -You’ll be able to decide to confirm the order or not after the VAT verification.

Chosen RAL number

Opaque lacquering

Insert the RAL, NCS or Pantone code (example: RAL 9003)

ORDER NOTES

SKU: HD70X240 Categories: ,

Description

The invisible Hinged door cm 70×240 is the ideal product for a seamless wall to door continuity, thanks to a frame perfectly integrated with both masonry and plasterboard, to the use of rollaway adjustable hinges and total lack of external door frames. It is proposed standard with a protective water based prime coat, leaving up to the client or designer’s expressive freedom the decision if finishing it like the wall it is built in or enhancing its geometry with special finishing and covering. Upon request the door is supplied lacquered or in wood.

Technical features and details (download technical sheets)  The single Invisible-door frame perfectly integrates with masonry and plasterboard walls of any thickness and allows for door installation with both opening swing directions.The press-drawn section is in anodised aluminium, alloy 6060, and satin silver finished.It is supplied with a gasket on all 3 door slams. The 53 mm thick panel is produced in veneered wood with solid wood on the sides and honeycomb wood core. It is completed with two panels in smoothed mdf. The Invisible-door is available in standard sizes (600-700-800 mm width and 2100 mm height), guaranteeing maximum convenience, and in customized sizes for total design freedom. Full height models are also available, as well as models without girder and hinged and double door panel types. Panel is pre-drilled and ready for hinges. Assemblage is carried out with water binders. The standard equipped magnetic lock prevents the frame to be scratched due to the friction of the lock latch used in traditional locks. You may choose the model with lock only for the utmost neat design or the model equipped with key or pin to protect your privacy. Adjustable hinges come standard on INVISIBLE-DOOR doors and shutter doors enabling to keep doors perfectly aligned thanks to easy adjustment of proper regulators.

Our invisible hinged door is available in standard sizes, guaranteeing maximum convenience, and in customized sizes for total design freedom. Full height models are also available, as well as models without girder and hinged and double door panel types.

 

Additional information

Weight 0,28 kg
Handle

None, None with key predisposition, None with privacy pin predisposition, Quadra – Satin chrome, Quadra with key – Satin chrome, Quadra with privacy pin – Satin chrome, Sirio – Satin chrome, Sirio with key – Satin chrome, Sirio with privacy pin – Satin chrome, Cono – Satin chrome, Cono with key – Satin chrome, Cono with privacy pin – Satin chrome, Recessed handle, Recessed handle with privacy pin, Invisible handle, Invisible handle with privacy pin

Door finish

Protective prime coat, Lacquering – RAL color

Advance shipment of frames

No, advance frame shipment, delivery of door with frame and accessories in 9/10 weeks, Yes, advance frame shipment, frame delivery in 5/6 weeks and sash delivery in the following 4 weeks.

Handles

Choose from the drop down menu the solution you prefer for the handle. If you want to install at a later time a handle purchased separately, choose between these three options:

  • None: the door is supplied without any accompanying handle, with a magnetic lock the magnetic lock that can receive any handle.
  • None - with key predisposition: the door is supplied without any accompanying handle, with a magnetic lock the magnetic lock that can receive any handle with key.
  • None - with privacy pin predisposition: the door is supplied without any accompanying handle, with a magnetic lock the magnetic lock that can receive any handle with privacy pin.

If you want to buy one of our handles you can choose between CONO, QUADRA, SIRIO or Invisible lock.

VAT

If you are a private customer inside the EU, the VAT will be applied to the price of your purchases.

If you are buiyng as a business company, the VAT won't be applied to the price of your purchases.