Invisible wardrobe 3 doors cm 150×260

1.787,00 including VAT and transport

1787 € including VAT and transport

Technical Specifications

  • Satin-finished aluminium frame ready for installation on any type of wall, pre-tested in the factory and therefore ready to be reassembled on site, our frame only needs grouting on the outside (on 3 sides) after fixing to the wall, so it is not necessary when building the wall or plasterboard;


  • Partition post between the opening of the two sashes and the third sash, to be fixed in the floor and in the upper transom, invisible from the outside when the sashes are closed;


  • Doors (3) made of 28 mm thicker mdf, already treated with a protective primer (cementite/primer) over the entire surface, the doors arrive ready to be painted with the same paint as the walls or to be covered with wallpaper;


  • 3-axis adjustable ‘click’ hinges with lock when closing (included with fixed minimal knob);


  • Minimal fixed ergonomic knobs, satin silver finish, 1.5 cm diameter and 3 cm depth, are very comfortable to use and can be replaced in the future with other types of handles or sockets;


  • Measurements of the compartment to be made (masonry, plasterboard, concrete) cm 156 x 263 H;


  • External-frame dimensions (the frame is 3-sided and has no lower floor crosspiece) cm 155 × 262,5 H;


  • Internal-frame dimensions (inside frame span with installation above finished floor) cm 150 x 260 H;


  • Door dimensions (+/-) cm 50 x 259,5 H already tolerated in the factory to be overflow-floor;


  • Real-passage measure when the doors is open (+/-) cm 96 + 48 x 260 H;


  • This product is ideal for enclosing laundry niches, wardrobe niches, wall cupboards between two partitions in corridors or in bedrooms;


  • The kit excludes interior equipment, customers usually choose to make plasterboard tops or purchase modular interior equipment systems from other manufacturers;


  • Installation is very easy for bricklayers, drywallers or craftsmen who install fixtures; we recommend DIY only for customers who have experience with plasterboard wall plastering and gauzing;


  • Preparing the compartment (in masonry, plasterboard, concrete) will allow you to get on with the work, and to wait for the arrival of the flush-to-wall cupboard with peace of mind, as long as you respect the measurements of the ‘compartment to be made’ given above;

Delivery Times

  • Selected EU-Countries Delivery (by telephone-appointment) included in the price, check the delivery time HERE you will find more information on delivery;


  • EU-Business-price Available! Please:
    -Add the product to the basket and go to the checkout.
    -Complete the form please and have a look to the 0%-VAT price after the 30-seconds VIES verification is done.
    -You’ll be able to decide to confirm the order or not after the VAT verification.

SKU: IW3D150X260 Categories: ,


The invisible wardrobes is designed to close large compartments, such as dressing rooms, closets or pantries. The aluminum frame, installed either on masonry or plasterboard wall, is completely integrated into the wall, ensuring coplanarity of the doors and the flush-to-the-wall effect that distinguishes our products. It can be made on measure, with leaves up to 60cm x 270cm, with no limit on the number of leaves. The hinges which support the door are in an amount sufficient to ensure the solidity of the system also for larger and heavier doors, but keeping the maximum width size within 60 cm allows us to ensure a fluid movement and a constant alignment of the doors without having to resort frequently to the adjusting of the hinges. The doors of our invisible wardrobes are proposed with the magnetic closure system with knob, the most suitable for intensive use as in the case of the dressing room, but can be equipped with a push-pull locking system on request. The doors in MDF, supplied as standard with a protective prime coat, are accompanied by a straightening bar which can restore the planarity of the panel in response to a possible warping. Like all our products, even the wardrobes can be lacquered in any RAL color. The overall dimensions of the frame reduces the actual size of the wardrobes of 5 cm in width and 2.5 cm in height so that a compartment measuring cm 100x200h will host a wardrobes measuring 95x207,5h cm (2x 47,5x207 cm doors).

Invisible wardrobe 3 doors cm 150×260

Additional information

Weight 1 kg
Lock option

Push-pull (no handle), Fixed Knob


Plasterboard, Masonry

Delivery times

9/10 weeks (included in the price), 11/14 weeks (included in the price)


If you are a private customer inside the EU, the VAT will be applied to the price of your purchases.

If you are buiyng as a business company, the VAT won't be applied to the price of your purchases.