How to install a invisible hinged door

Installing a flush swing door requires some important considerations. Here is the simplest way to proceed.

Choosing invisibles hinged doors for your interior design certainly has many advantages in terms of aesthetics, functionality, and customization. But how do you install a flush swing door? The success of the operation depends greatly on the type of door, as some are quite complicated and require the intervention of the retailer. In the case of Invisible-door.com doors, installation is extremely easy, thanks to the unique characteristics of the panels and the accuracy of specially designed solutions, which minimize the possibility of error. This means that those who purchase one do not necessarily need to use the installation service. Here is how to install a invisible hinged door.

Installing a invisible hinged door in plasterboard or masonry: the preliminary selection.

Before installing a invisible hinged door, you need to choose the type of structure in which to insert it. Invisible-door.com’s doors are ideal for both masonry and plasterboard walls. Depending on your needs, the door will be supplied with the appropriate installation features, ensuring a seamless finish with the wall.

Features of invisible hinged doors for installation.

Invisible-door.com hinged doors are available in both standard sizes (width 60-70-80 cm and height 210 cm) and customizable sizes. To ensure maximum choice, full-height versions without a top crossbar, swivel versions, and double-leaf versions are also available. The panel is pre-drilled to accommodate the concealed, adjustable hinges. This ensures perfect alignment of the door leaves. In addition, each door has a standard magnetic lock that prevents the latch normally found in classic locks from rubbing against the frame.

How to install invisible hinged door in plasterboard.

For instructions on installing a invisible hinged door in plasterboard, please see the following figure:

• First, insert frame A into the appropriate compartment, aligning the plasterboard perfectly with the outer wall of the frame.
• Before securing the frame, use a plumb line to check that it is perfectly level.
• At this point, we will secure the frame using the pre-installed brackets B. In doing so, we will ensure that the frame is level and plumb. Important: on the inside, we will make sure that the aluminum profile overlaps the plasterboard, as shown in detail C.
• We will carefully tape and reinforce the wall joints between the plasterboard and the aluminum frame. Then insert the door into the frame, screwing the hinges into the holes on the frame.
• Continue by shimming the bottom of the door so that the hinges can be adjusted without any weight on them.
• Once this operation is complete, remove the shims and install the chosen handles.