Invisible wardrobe 3 doors cm 150×260

1. The construction 🧱 and thickness of the door: the door of the wardrobe has an increased thickness of 28 mm and is composed of a fully edged MDF exterior; on the inside, it has a mix of honeycomb and solid wood, with an aluminum perimeter frame. On the other side, the panel is 19 mm thick and is constructed of solid MDF, also fully edged. Remember: our doors are NOT made of laminate!
2. The height of the door: the composition and thickness of the wardrobe door allow us to produce doors up to 3 meters in height, while the panel can reach a maximum of 180 cm in height.
3. The standard frame: the standard frame of the invisible wardrobe is 3-sided, while the frame of the panel is perimeter 4-sided.

Need more information? Check out our technical sheets!

1. The direction of opening is always decided by imagining that you are in front of the panel and wardrobe door, on the flush side, that is, outside the niche you need to hide, such as the hallway.
2. The direction in which it opens, to the right or left, depends on how you intend to position the door hinges: if you position the hinges to the right, the door will open to the right; if you position them to the left, the door will open to the left.

NO!

⚠️ Interior equipment systems (such as shelves, etc.) are NOT included with our products.

What you can do.

1. Make shelves from drywall: directly with the drywall contractor in charge of installation 🔨
2. Order from another supplier and install modular systems including shelves, drawer units and hanging racks separately

The installation of our invisible wardrobes or panels can be carried out in two main scenarios:

1. During Construction: You can have the invisible wardrobe or panel installed during renovation work.
2.  When the work is completed: The door can also be installed on already finished walls, with completed floors and ceilings, as shown in the video (watch it now!).

ℹ️ If you have any additional questions regarding the installation of our invisible wardrobes or panels, please visit the dedicated section!